东腾机械

Synchro-fly Paper Sheeting Machine-

DTCP-1400/1700/1900

Brief Introduction


DTCP Series High Speed Servo Synchro Paper Sheeting

Machine is mainly used to cut the paper reel into 

sheets. It adopts the most advance technology, including 

the AC servo driving system. The driving system ensure 

the machine working high speed,continuously, and stably.

It is widely used in the paper mills,paper convertors,as 

well as the printing houseetc.     


Main Characteristics


1.The machine used the twin rotary shearing method, not 

    the traditional cutting method.

2.High cutting accuracy, the squareness will meet the 

    printing requirement with one cutting process, 

    no need for second cutting.

3.After sheeting by the machine, the finished sheet can 

    be used on printing machine directly.

4.Cleaning cutting edge, not bur or dust generated.











   

Hydraulic back stand: The arms’ open & close, moving forward &backward are controlled by  by the hydraulic drive. The arms’ up & down are control by the hydraulic drive. Pneumatic brake.

Automatic slitting knifes,Upper knife: the distance of the slitting adjusted by servo motor automatically. Down knife: The spindle is fixed and the the width of the slitting adjusted by servo motor automatically.

Blade Rollers: Adopt cutting method from the GERMAN. Driving roller: Roller’s surface adopts the expansion grain design, and the roller which pressurizes the paper is controlled by the cylinder. Rotary Blades: Made by special alloy steel and precision machining, long life, knife edge is easily to adjustment.

Type: Transport horizontally and speed of multi-steps is different; In order to show the effect the separate counting and stack.

paper output section: Elaborate paper separator can be adjusted coordinated with the web quantity. And the pressurized transport wheel can steady paper, avoid excursion.

Hydraulic-lift paper stacking, when the paper is stacked up to a certain level the lift will descend automatic. Max. paper pilling height: 1500mm

The original SIMENS PLC, motion controller and Italy PHASE servo motor, OMRON electrical components are adopted.

Model
  • DTCP-1400/1700/1900
Type of cutting paperSynchro Rotary Blades Sheeting
Thickness of paper60-600gsm
Max. paper roll dia.Max.1600mm(75〞)
Max. paper roll width1450mm/1750mm/1950mm
Cutting length Range450-1500mm
Paper roll No.Standard:2 rolls ( 1/2/4/6 rolls available for choice )
Cutting precisionIf cutting length<1200mm: ±0.5mm
If cutting length>1200mm :±0.1%
Slitting Precisioin±0.1mm
Max. cutting speed380meter/min
Max. working meter Speed300m/min
Max. cutting speed300cutting/min
Max. piling height1500mm
Air compressor required0.8Mpa
Power of servo motor105Kw
General Power135KW/140KW/145KW
Power consumption required380V/220VⅩ50Hz/60Hz
Machine Weight16T
  • RUIAN DONGTENG MACHINERY CO., LTD. 浙ICP备08102083号
  • Copyright © 2007-2014 ALl rights reserved
  • @高格广告 设计制作
Top